Corrugated Box Machinery

ACME Eccentric Slotter Machinery
Speed: All the machines are running approx.25 to 30 strokes per minutes. Minimum distance between two slots is 4" (10 cms). Maximum distance between slot at one end & 'L' shape corner cutting at other end is about 5" less than the size of the machine.

The next operation after creasing will be slotting in the corrugated board for making the box. The machine is provided with three slots and one L cutting. The Eccentric Slotting machine is ideal for slotting on both sides with L shaped cutting. The bottom portion (female knives) are moving on rack and can make the adjustment as per our requirement. The gauge is provided on the table and on the knives for the required depth. One steering wheel is also provided to operate by hand to check the proper adjustment. Oil cups are provided for lubrication. Safety guards are also provided.

ACME Four Bar Rotary Creasing And Slitting Machinery
The first process in box making is to crease and slit the corrugated sheets, once vertically and afterwards horizontally to the required length and width. The machine is heavy duty and sturdy, mounted on U channel platform properly leveled. The creasing dies and the cutters are in two halves and are easily adjustable as per required sizes.

The machine is provided with two Nos. of gauges (left and right) on the feeding table to make use of both the ends. All the four shafts are fitted on ball bearings for smooth running. Up and down movement of the shafts are provided through Eccentric bushes. One steering wheel is provided to rotate by hand and check the proper adjustment. Oil cups are provided for proper lubrication, Safety guard is fitted to the side of V belts.

Technical Specification

ACME Super Stitch Box Stitching Machinery
The last and final operation before dispatch is of stitching. Box stitching machine is most useful in the box factory. The parts are standardized and are interchangeable. The machine is capable of continuous running at the high speed. Various models of stitching machines are available like Angular-Straight-Bottom etc. You can use flat wire 12 x 25 gauge in all the machines and round wire 21 gauge in straight machine by changing some parts. The design of the machine is universal and world famous. Very easy in operation and also for servicing & repairing. All the spares are always available all around the world.

Technical Specification

ACME Eccentric Slotter Machinery

4 sets of Creasing 2 sets of Slitting (Trimming) 3 sets of Slotting 1 set of Corner Cutting